Total TP880-1 - Maintenance and Label Safety; Service and Maintenance Safety Rules; Label Location Information

3.3.3 DO NOT remove air cleaner cover，paper element，or precleaner while engine is
running．
3.3.4
DO NOT alter engine speeds．Run the engine only at speeds specified in the
Technical Data Section．
3.3.5
DO NOT crank a flooded engine with the spark plug removed on gasoline-
powered engines．Fuel trapped in the cylinder will squirt out the spark plug
opening．
3.3.6 DO NOT test for spark on gasoline-powered engines if the engine is flooded or
the smell of gasoline is present．A stray spark could ignite the fumes．
3.3.7
DO NOT use gasoline or other types of fuels or flammable solvents to clean
parts，especially in enclosed areas．Fumes from fuels and solvents can become
explosive．
3.3.8
ALWAYS replace the safety devices and guards after repairs and maintenance．
3.3.9
ALWAYS keep the area around the muffler free of debris such as leaves，paper
cartons，etc．A hot muffler could ignite the debris and start a fire．
3.3.10
ALWAYS do Periodic Maintenance as recommended in the Operator's Manual．
3.3.11
ALWAYS clean debris from engine cooling fins．
3.3.12
ALWAYS replace worn or damaged components with spare parts designed and
recommended by us Corporation．
3.3.13
ALWAYS disconnect the spark plug on machines equipped with gasoline
engines，before servicing，to avoid accidental start-up．
3.3.14
ALWAYS keep the machine clean and labels legible．Replace all missing and
hard-to-read labels．Labels provide important operating instructions and warn of
dangers and hazards.
3.4 Label Locations
10