Engine overheats． ·Clean cooling fins and fan blades．
Engine runs，rammer does not
tamp．
·Inspect clutch for damage．Replace if necessary．
·Broken connecting rod or crankgear．
·Low engine performance．Compression loss．
Engine runs．rammer
operation is erratic ．
·Oil/grease on clutc h．
·
Broken/worn springs．
·
Soil buildu p on rammin g shoe．
·
Broken parts in ramming system or crankcase．
·
Engine operating spee d is too hig h．
On machines equipped wi th
the low oil shutoff swi tch the
warning lig ht flashes slowly，
the engine starts but sh uts off
after 10-12 seconds．
·Engine oil level is low．Add oil to the engin e．See
Technical Data for oil quantity and type
ydemeR/nosaeR motpmyS/melborP
On machines equipped wi th
the low oil shutoff swi tch，the
engine star ts and conti nues to
run but the low oil warning
light stays on continuo usly．
·Check the switch for p roper wire connections.
·Swi tch is not functioning pro perly．Replace the
switch.
On machines equipped wi th
the low oiI shutoff swi tch the
engine star ts and conti nues to
run，but t he low oil warning
ligh t did no t flash qui ckly once．
·Check th e switch for proper wire connections and
grounding.
· Switch is not functioning properly . Replace the
switc h．
To Next Page
Loading...