6
Product description
1. Depth stop
2. Dust protection cap
3. Tool holder locking sleeve
4. Mode/function selection switch
5.ON/OFF switch
6. Rotation control (forward/reverse)
7. Battery
8. Auxiliary handle
9. Battery extraction button
The machine is designed for hammer drilling and chiseling in concrete or brick. It is also
suitable for non-impact drilling in wood, metal, ceramics and plastic.
Note: Not all accessories illustrated or described need to be included in the standard delivery.
Set up
Before using
Battery charge
• Total's battery pack charger matches the lithium-ion battery installed in the
machine. Do not use any other battery charger.
To Next Page
Loading...