TOTALCOOL 3000 - Step-by-Step Setup Guide; Unpacking and Initial Setup; Filling with Water; Connecting Power Source

Connect ether the 12 volt or
AC converter lead into the
rear of the unit and then
plug into your 12 volt or
mains power.
4.
Power
Supply
Totalcool
Unit
Open a window /
roof vent / door.
3.
Turn on the unit to the
desired speed.
1, 2, 3 or Boost
5.
Open the lid of
the unit and pour
in normal tap
water up to the
fill level on the
sight glass and
replace the lid.
2.
Remove the unit from its
packaging and remove the
power lead from its box.
1.
12v
or
AC converter
STEP BY STEP