EN
PLEASE CALL CUSTOMER CARE BEFORE RETURNING ITEM TO STORE: 1-888-412-6001
7
3
Step 3. Choose a fountain
head for the desired water
effect, and assemble your
choice as shown.
Step 4. Connect the
extension tube to the outlet
of the pump using the
supplied adapters.
NOTE: pump not included.
For Fountain Pump 320
gph and Pond Pumps
200-800 gph, use the 3/4”
adapter and swivel adapter
to connect the extension
tubes to the outlet of pump.
For the Fountain Pump
525 gph, use the 5/8”
adapter and swivel adapter
to connect the extension
tubes to the outlet of pump.
NOTE: 5/8” adapter is NOT
INCLUDED in this kit but
with the purchase of the
pump.
Step 5. Place the pump
into water and connect
the pump into a properly
grounded electrical outlet. If
the diverter valve was used,
you can adjust the flow
control as needed.
Step 6. Utilize the pivoting
base to achieve a more
vertical fountain display if
needed, and tighten the
locking nut for a secure fit.
4
65
To Next Page
Loading...