VISIT WWW.TOTALPOND.COM FOR INFORMATION AND TIPS.
EN
8
MAINTENANCE
• Before cleaning, always disconnect the pump from the
power source. Please refer to the pump instruction manual
for proper pump maintenance.
• Periodically disassemble the fountain head kit and clean the
parts.
• Use a cloth or soft brush with warm, soapy water. Be sure to
use biodegradable soap.
NOZZLE WATER PATTERNS
E Waterspray fountain head
F Trumpet fountain head
G Waterbell fountain head
H Foam-jet fountain head
E F G
H
TROUBLESHOOTING
IF THE PERFORMANCE OF THE FOUNTAIN
NOZZLE IS NOT SATISFACTORY OR THE
FOUNTAIN DOES NOT FLOW EVENLY:
• Check to make sure the attached pump is completely
submerged in water.
• Adjust the pump’s flow control.
• Check to make sure the pump’s power cord is plugged in
and the pump is getting power.
• Check the pump outlet, nozzles, spitter and any tubing for
kinks or obstructions.
To Next Page
Loading...
