EN
PLEASE CALL CUSTOMER CARE BEFORE RETURNING ITEM TO STORE: 1-888-412-6001
9
MAINTENANCE
• The light ring may require cleaning from time to time for
optimal performance.
• Before cleaning, always disconnect from the power
source.
• Use a soft cloth or brush and warm water to clean the
parts.
• Reconnect to the power source when you are fnished.
LIGHT PERFORMANCE
TROUBLESHOOTING
• If light ring fail to illuminate, check that light ring are
getting power by testing another appliance in the same
power outlet.
• The light ring is designed to turn on when it gets dark,
and turn off when it gets light. To activate the light
during daylight hours, cover the sensor.
• If light ring do not turn off during daytime, check
sensor. Make sure the sensor faces up and is not
covered by dirt or debris.
For more information on product maintenance
and maintenance videos, visit www.totalpond.
com
Power Consumption
Power: 0.8 watt
Voltage: 12 volts
Cord length
1 ft. cord from outlet to sensor
10 ft. cord from sensor to light ring
To Next Page