Do you have a question about the Toto GP0133-A50-01 and is the answer not in the manual?
Brand | Toto |
---|---|
Model | GP0133-A50-01 |
Category | Medical Equipment |
Language | English |
Automated lateral turning system with Control Unit and turning platform for pressure ulcer prevention.
Suitable for patients at moderate to high risk of pressure ulcers needing assistance with turning.
Do not use with unstable spinal cord injuries, traction, or equilibrium disturbances.
Used in nursing homes, care homes, and hospitals for long-term or extended care.
Individual patient assessments needed. Caution with neurological disorders, body shapes, other devices.
Step-by-step guide to install the platform and cover, connect hoses, and check connections.
Position patients centrally. Support head/shoulders. Use padding for patients unable to control limbs.
Selects air cell sides: Left and Right, Left only, or Right only, confirmed by beep and LED.
Press and hold start/stop for 3 seconds. System defaults to both sides, 120 min inflate/rest.
Adjusts inflation duration from 30 to 240 minutes, confirmed by beep and LED.
Temporarily deactivates functions for patient interaction, returns to selected settings on deactivation.
Adjusts deflation duration from 30 to 240 minutes, confirmed by beep and LED.
Locks settings by holding Alarm Mute for 4 seconds; only Alarm Mute remains functional.
Quick release valve for rapid deflation in emergencies, marked with a yellow tab.
Inspect cover, zip fasteners, hinges, and air cells for damage. Retain batch number labels.
Procedure for replacing air cells, including disconnecting unit, unzipping cover, and refitting.
Store securely, handled by two people, avoid dragging, protect from sharp objects, damp, heat.
Check air filters every 24 months. Contact for advice on service and repair.
Instructions for light and heavy soiling, including use of detergent and hypochlorite solutions.
Disinfection via laundering at specific temperatures for 10 or 3 minutes.
Line dry in a clean, indoor environment. Covers must be thoroughly dried before re-fitting.
Wipe clean with alcohol wipes or chlorine derivative. Avoid liquids entering apertures.
Procedure to switch off, disconnect, remove, clean with water, and refit air filter cover.