EasyManua.ls Logo

Toto LT650 - English; Table of Contents; Thanks for Choosing TOTO; Warnings

Toto LT650
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Provide proper reinforcement,
such as a brace, between the studs
of the wall to help support the
lavatory.
Install the brace at the proper
height (H), which corresponds to
the lavatory mounting hole loca-
tions.
For best results, the floor must be
level and the wall must be square
with the floor.
3
ENGLISH
TABLE OF CONTENTS
THANKS FOR CHOOSING TOTO!
The mission of TOTO is to provide the world with healthy, hygienic and more
comfortable lifestyles. We design every product with the balance of form and
function as a guiding principle. Congratulations on your choice.
Thanks for Choosing TOTO
®
! ............................................................................. 3
Warnings ............................................................................................................... 3
Before Installation ................................................................................................ 3
Installation Procedure ....................................................................................... 4-5
Warranty................................................................................................................ 6
BEFORE INSTALLATION
If you are installing this product in a new construction or remodel, please
make sure you are following all local plumbing and building codes. Carefully
unpack and examine your new fixture for damage. To help ensure that the
installation process will proceed smoothly and correctly, please read these
instructions carefully before you begin.
WARNINGS
When this symbol appears in the manual, it is alerting you of
potential misoperations that may cause personal injury and/or
property damage.
Provide proper reinforcement,
such as a brace, between the studs
of the wall to help support the
lavatory.
Install the brace at the proper
height (H), which corresponds to
the lavatory mounting hole loca-
tions.
For best results, the floor must be
level and the wall must be square
with the floor.
WARNING
B
racket
Mounting hole loca
tion
H
Existing wall
Reinforcement
Stud

Related product manuals