2
TABLE OF CONTENTS
THANKS FOR CHOOSING TOTO
®
!
CARE AND CLEANING
CAUTION
ENGLISH
THANKS FOR CHOOSING TOTO
®
!..............................................................................................2
CARE AND CLEANING ..................................................................................................................2
CAUTION ...........................................................................................................................................2
TOOLS YOU WILL NEED ...............................................................................................................3
BEFORE INSTALLATION ................................................................................................................3
INSTALLATION PROCEDURE ......................................................................................................4
REPLACEMENT PARTS .................................................................................................................6
ROUGH-IN .......................................................................................................................................9
TROUBLESHOOTING ..................................................................................................................10
LIFETIME WARRANTY ................................................................................................................11
T
HE MISSION OF TOTO® IS TO PROVIDE THE WORLD WITH HEALTHY, HYGIENIC AND MORE COMFORTABLE
LIFESTYLES. WE DESIGN EVERY PRODUCT WITH THE BALANCE OF FORM AND FUNCTION AS A GUIDING
PRINCIPLE. CONGRATULATIONS ON YOUR CHOICE.
Y
OUR NEW FAUCET IS DESIGNED FOR YEARS OF TROUBLE-FREE PERFORMANCE. KEEP IT LOOKING NEW BY
CLEANING IT PERIODICALLY WITH MILD SOAP, RINSE THOROUGHLY WITH WARM WATER AND DRY WITH A
CLEAN, SOFT CLOTH. DO NOT USE ABRASIVE CLEANERS, STEEL WOOL OR HARSH CHEMICALS, AS THESE WILL
DULL THE FINISH. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY VOID YOUR WARRANTY.
FOR SAFE OPERATION OF THE FAUCET, PLEASE OBSERVE THE FOLLOWING:
R
ECOMMENDED OPERATING PRESSURE:
M
INIMUM PRESSURE……..20PSI (0.14 MPA)
M
AXIMUM PRESSURE…….80PSI (0.55 MPA)
I
F SOLDERING DURING INSTALLATION, DO NOT APPLY EXCESSIVE HEAT TO THE VALVE BODY.
E
XCESSIVE HEAT MAY DAMAGE THE INTERNAL SEALS AND PLASTIC COMPONENTS.
D
O NOT USE THE PRODUCT AT AMBIENT TEMPERATURE BELOW 32°F (0°C).
To Next Page
Loading...
Need help?
General
