K
Kaitlin WilliamsonAug 17, 2025
Why is my Toto toilet remote control not working?
- AAlicia CrawfordAug 18, 2025
If the remote control for your Toto toilet isn't working, try replacing the batteries. This is often the simplest solution.
To Next PageTo Next PageWhy is my Toto toilet remote control not working?
If the remote control for your Toto toilet isn't working, try replacing the batteries. This is often the simplest solution.
What to do if Toto toilet does not flush when the button is pressed?
If your Toto toilet does not flush when you press the button, avoid pressing the button repeatedly. Wait about 60 seconds, then try flushing the toilet using the remote control.
What to do if Toto toilet stops due to low water pressure?
If the function of your Toto toilet stops due to a significant drop in water supply pressure, unplug the power plug and wait about 10 seconds before plugging it back in. This can help reset the system.
What to do if a water leak occurs with Toto SW3046 Toilets?
If you notice a water leak with your Toto toilet, the first step is to immediately close the shutoff valve to stop the flow of water and prevent further damage.
Why does my Toto toilet flush on its own?
If your Toto toilet is flushing on its own, ensure that you are sitting back properly on the seat. The seat switch requires proper contact to function correctly.
Why is the water not warm enough on my Toto toilet?
If the warm water temperature on your Toto toilet is not warm enough, check if the temperature is set to "OFF" or a low level. If so, adjust the setting to a higher level.
Why is the 'Power' LED flashing on my Toto toilet?
If the power LED on the main display of your Toto toilet is flashing, it indicates that the main unit is not mounted properly. Remount the unit correctly to resolve this issue.
Why doesn't my Toto toilet lid close automatically?
If your Toto toilet lid does not close automatically, check whether the "Auto open/close" setting is set to "OFF". If it is, set it to "ON" to enable automatic closing.
Why does the deodorizer on my Toto toilet seem to be not working?
If you suspect the deodorizer in your Toto toilet is not working effectively, consider whether you are using a separate air freshener or deodorizer. These can interfere with the built-in deodorizer, so remove them.
Why does my Toto toilet stop while opening?
If your Toto toilet stops (or closes) while opening, it might be because the lid or seat hit an obstruction when it first opened after plugging it in. Remove any obstructions and unplug the power plug to reset.
General| Brand | Toto |
|---|---|
| Model | SW3046 |
| Category | Toilets |
| Shape | Elongated |
| Material | Ceramic |
| Heated Seat | Yes |
| Water Spray | Yes |
| Warm Air Dryer | Yes |
| Deodorizer | Yes |
| Night Light | Yes |
| Remote Control | Yes |
| EWATER+ | Yes |
| Flush Type | Tornado Flush |
| Rough-In Size | 12 inches |
| ADA Compliant | Yes |
| CeFIONtect Glaze | Yes |
| Siphon Jet Flushing Action | Yes |
| Tornado Flush | Yes |
| Features | Heated Seat, Water Spray, Warm Air Dryer, Deodorizer, Night Light, Remote Control, EWATER+ |
| Color | Cotton White |
| Water Consumption | 1.28 GPF |
| Height | 20.5 inches |
| Power Source | AC120V, 60Hz |
| Water Supply | Direct connection to water supply |
Explains symbols used for safety instructions.
Crucial safety warnings about electrical hazards and product use.
Warnings about burns from prolonged use and electrical shock risks.
Cautions regarding physical damage and using appropriate cleaning agents.
Warnings about battery fluid and potential health effects of spraying.
Cautions against instability, applying excessive force, and using incorrect cleaners.
Guidelines for proper electrical grounding to ensure safety.
Essential steps to prevent product malfunctions and physical damage.
Compliance with FCC/IC rules and radio frequency exposure warnings.
Identification of key parts on the main display and unit sides.
Identification of components on the right rear of the main unit.
Step-by-step guide for first-time use and remote control setup.
Details on battery type and precautions for safe battery handling.
Explains flush buttons, cleansing modes, and wand operations.
Details seat opening/closing, stopping, and warm air drying.
How to adjust water pressure, wand position, and use personal settings.
Overview of the remote control's menu screen and setting lock feature.
Describes automatic wand cleaning, bowl cleaning, and deodorizing.
Explains the bowl light and CLEAN indicator functions.
Details automatic flushing, lid opening/closing, and soft lighting.
How to adjust temperatures for water, toilet seat, and drying air.
Details auto energy saver, auto energy saver+, and timer energy saver functions.
Step-by-step instructions for configuring energy saving features.
Procedure for disabling the energy saver function.
Instructions for cleaning and maintaining the power plug.
Daily cleaning procedures for the main unit of the product.
Monthly maintenance for the deodorizing filter.
How to clean the wand when dirt is noticed.
Instructions for removing and cleaning between the main unit and bowl unit.
Procedure for cleaning the main unit and toilet lid.
Maintenance steps for the water filter drain valve.
A comprehensive list of configurable settings and their functions.
Details for configuring automatic flushing, opening/closing, and cleaning.
Options for language selection, beep sounds, and setting locks.
How to set up and adjust the automatic flushing feature.
Setting the time delay for automatic flushing operations.
Settings for automatic toilet lid and seat opening/closing.
Adjusting the time delay for automatic lid/seat closing.
Adjusting the time delay for automatic lid/seat opening.
Configuring how the seat and lid automatically open.
Enabling or disabling the automatic wand cleaning feature.
Enabling or disabling the automatic bowl cleaning feature.
How to turn the deodorizer function on or off.
How to manage the automatic power deodorizer feature.
Enabling or disabling the soft light for illumination.
Managing the bowl light and CLEAN indicator functions.
Procedure for selecting the user interface language.
How to configure beep sounds and activate the setting lock.
How to save and recall personalized user settings.
Steps to register preferred water pressure, wand position, and temperature.
Steps for operation during a water supply disruption.
Troubleshooting common problems with the remote control.
Measures to protect the product from freezing in cold environments.
Instructions for detaching the operation guide from the wall mount.
Diagnosing and resolving problems with wand extension and cleansing.
Solutions for issues with warm air drying and flushing functions.
Resolving problems related to automatic seat and lid movements.
Troubleshooting common problems with energy saving and deodorizing features.
Addressing miscellaneous problems not covered in other sections.
Comprehensive terms and conditions of the product's one-year warranty.
