To Next PageTo Next PageWhat to do if the deodorizer is not working on my Toto toilet?
If the deodorizer on your Toto toilet seems to be not working, first ensure that 'Deodorizer' is not set to 'OFF'. If you hear an operation sound but odors persist, clean the deodorizing filter. Also, remove any separately purchased air fresheners or deodorizers.
What to do if the power LED on my Toto toilet is flashing?
If the power LED on your Toto toilet is flashing, it could be due to the main unit not being mounted correctly. Remount the unit properly.
What to do if my Toto toilet is not turning on?
If your Toto toilet is not turning on, check if the "Power ON/OFF" setting is set to "OFF". If it is, use the remote control to switch it to "ON".
What to do if the wand does not come out on my Toto toilet?
If the water supply pressure drops significantly due to water usage elsewhere or a water failure, switch the breaker on the distribution board to OFF, wait about 10 seconds, and then switch it back ON. Also, check if the water filter drain valve is clogged with foreign matter and clean the filter if necessary.
Why won't the lid on my Toto toilet open automatically?
If the lid on your Toto toilet isn't opening automatically, ensure that 'Auto open/close' is set to 'ON'. Note that even when set to 'ON', 'Auto open/close' is not performed for about 15 seconds after the toilet seat or toilet lid is closed. Move away from the toilet and wait at least about 15 seconds before approaching the bowl unit again or open and close by hand. Also, remove any toilet lid or seat covers, as these can interfere with the sensor.
Why does my Toto toilet seat feel cold?
If your Toto toilet seat feels cold, it may be because you have been seated for a long time, so stand up from the seat and then use again. Also, check if the energy saver is in operation.
Why is the Energy saver LED not lighting up on my Toto toilet?
If the Energy saver LED on your Toto toilet is not lighting up, it may be because the breaker on the distribution board was switched off or there was a power outage. It will turn on within about 24 hours since the setting is retained.
What to do if the soft light, bowl light and CLEAN indicator do not light up on my Toto toilet?
If the soft light, bowl light, and CLEAN indicator on your Toto toilet do not light up, ensure that the 'Soft light', 'Bowl light' and 'CLEAN indicator' setting is set to 'ON'.
Explains the meaning of warning and caution symbols used in the manual.
Guidelines to avoid product malfunctions, failures, and physical damage during use.
Technical specifications related to the product's radio frequency emissions.
Identifies and labels key components of the main unit and its sides.
Step-by-step guide for initial product setup and battery installation.
Instructions on how to switch on the product's power and open the water shutoff valve.
Explains basic functions controlled via the remote, like flushing, cleansing, and drying.
Details on swipe-operated functions like water pressure, wand position, and personal settings.
Explains how to navigate the remote control's menu for settings adjustment.
Instructions on how to activate or deactivate the setting lock function.
Configure auto flushing enable/disable and flush delay timing.
Configure auto lid/seat open/close enable and delay timing.
Enable/disable auto wand cleaning, auto bowl cleaning, deodorizer, and auto power deodorizer.
Adjust soft light, bowl light, and CLEAN indicator operation.
Change display language, beep sound, setting lock, and personal settings.
Steps to take for water service interruptions or if the remote control is not working.
Step-by-step guide on how to replace batteries in the remote control.
Measures to protect the product from freezing in cold temperatures.
Steps to follow to re-supply water after long periods of disuse or freezing.
Instructions for detaching and reattaching the operation guide to its wall mount.
Diagnosing problems related to power LEDs, energy saver features, and remote control operation.
Addresses issues where the wand or cleansing water does not dispense correctly.
Troubleshooting low water pressure, cold water, and unexpected operation stops.
Addresses low dryer temperature and operation stopping mid-use.
Solutions for flushing failures, button responsiveness, and auto-flushing delays.
Troubleshooting why the toilet lid does not open or closes unexpectedly.
Resolving issues where the lid stops or closes during the opening sequence.
Steps to take if the remote control fails to operate the lid/seat.
Addresses problems with the toilet seat not heating up or feeling cold.
Troubleshooting why the energy saver LED doesn't light up or the feature isn't working.
Solutions for deodorizer malfunctions and unexpected odors.
Diagnosing problems with soft light, bowl light, and CLEAN indicator not illuminating.
Troubleshooting pre-mist, after-mist, and spontaneous spraying issues.
Addresses water leaks from connections and the remote display going out.
Resolving issues with main unit stability, loose bolts, and operational sounds.
Details on power supply, consumption, dimensions, and weight of the unit.
Technical specifications for cleansing functions, warm air drying, and heated seat.
Specifications for deodorizer, water supply pressure, and operating temperatures.
Recommendations for periodic inspection and replacing the product when its lifetime expires.
Procedures to follow if any abnormality or malfunction is observed.
Details the terms and conditions of the one-year limited warranty for TOTO products.
Outlines items not covered by the warranty and limitations on liability.
General