Need help?Do you have a question about the Touch Dynamic Atlas All-in-one and is the answer not in the manual?
Provides specific safety warnings regarding the handling and replacement of lithium batteries to prevent explosion hazards.
Lists the essential accessories included in the product packaging for initial setup and operation.
Details the input/output ports available on the system, including their location and labels.
Illustrates the rear panel of the system, highlighting ports and components.
Defines the pin assignments for the LVDS connector used for display.
Details the pin configuration for the SATA interface for storage devices.
Specifies the pinout for the DC power input jack.
Defines the pin configuration for the 2-layer USB 2.0 ports.
Details the pin assignments for the 2-layer USB 3.0 and 2.0 combo ports.
Instructions for installing or removing the system's hard disk drive.
Guide for installing the driver for the VFD (Vacuum Fluorescent Display) module.
Details on proper methods, essential supplies, and acceptable/unacceptable cleaning agents for LCD screens.
General| Storage | 64GB SSD |
|---|---|
| Processor | Intel Celeron J1900 |
| RAM | 4GB |
| Operating System | Windows 10 IoT Enterprise |
| Connectivity | Wi-Fi, Ethernet |
| Touchscreen | Projected Capacitive |
| Weight | 12.1 lbs |
| I/O Ports | 6 x USB, 2 x Serial, 1 x LAN |
| Display Type | LED |
To Next Page
