M
Mary BrownAug 16, 2025
What to do if TOUGHBUILT TB-H2-LL-100-L2 temperature is too low or too high?
- RRodney SmithAug 16, 2025
If the temperature is too low or too high, allow the TOUGHBUILT Laser Level instrument to cool down or warm up.
To Next PageTo Next PageWhat to do if TOUGHBUILT TB-H2-LL-100-L2 temperature is too low or too high?
If the temperature is too low or too high, allow the TOUGHBUILT Laser Level instrument to cool down or warm up.
What to do if TOUGHBUILT TB-H2-LL-100-L2 batteries are low or depleted?
If you observe low charge or depleted batteries, replace them with new batteries.
What to do if TOUGHBUILT TB-H2-LL-100-L2 Laser Level is placed on an inclined surface?
If the TOUGHBUILT Laser Level is placed on an inclined surface (beyond ± 4°), place the instrument on a level surface.
What to do if TOUGHBUILT Laser Level instrument is tilted beyond its self-leveling range?
If the TOUGHBUILT Laser Level instrument is tilted beyond its ± 4° self-leveling range, reposition the instrument.
How to fix TOUGHBUILT TB-H2-LL-100-L2 laser beam out of leveling?
If the laser beam is out of leveling, perform the accuracy check.
What to do if TOUGHBUILT TB-H2-LL-100-L2 Laser Level has debris on the laser beam?
If there is debris on the laser beam, clean the window of the TOUGHBUILT Laser Level with a damp lint-free cloth.
What to do if TOUGHBUILT TB-H2-LL-100-L2 Laser Level batteries are not inserted?
If the batteries are not inserted, insert 3 x AA batteries into the TOUGHBUILT Laser Level.
What to do if TOUGHBUILT TB-H2-LL-100-L2 has incorrect battery polarity?
If there is incorrect battery polarity, check the battery polarity in your TOUGHBUILT Laser Level.
What to do if TOUGHBUILT TB-H2-LL-100-L2 Laser Level has corroded battery terminals?
If the battery terminals are corroded, clean the battery terminals of your TOUGHBUILT Laser Level.
What to do if TOUGHBUILT Laser Level has depleted batteries?
If the batteries are depleted, replace them with new batteries in your TOUGHBUILT Laser Level.
General safety warnings and instructions for safe operation of the laser level.
Explanation of symbols used on the laser tool and in the manual.
Important safety notes regarding tool usage, environment, and potential hazards.
List of various applications and uses for the cross line laser level.
Identification and function of the laser level's various controls and indicators.
Procedure to verify and calibrate the horizontal laser beam for accuracy.
Procedure to verify and calibrate the vertical (plumb) laser beam for accuracy.
Important precautions for maintaining the laser level's condition and preventing damage.
Information on proper disposal and recycling of the laser level.
General| Model | TB-H2-LL-100-L2 |
|---|---|
| Category | Laser Level |
| Brand | TOUGHBUILT |
| Self-Leveling Range | ±4 degrees |
| Number of Lasers | 2 |
| Laser Lines | Horizontal and Vertical |
| Battery Type | AA |
| Weight | 1.2 lbs |
| IP Rating | IP54 |
| Warranty | 3 years |
| Laser Class | Class II |
| Laser Wavelength | 635nm |
| Battery Quantity | 4 |
| Accuracy | ±1/8 inch at 30 feet |
| Working Range | 100 feet |
| Mounting Options | Magnetic Base, Tripod Mount |