ToughTested TranformerX - Pairing the TransformerX Bluetooth Earbuds

To Next Page

To Previous Page

PAIRING THE EARBUDS

PAIRING THE TRANSFORMERX BLUETOOTH EARBUDS

The TransformerX Bluetooth Earbuds connect to Bluetooth-enabled devices with version 4.0 or higher.

In order to pair the earbuds to your device, follow the directions below:

1. Press and hold the power button until a voice is heard which indicates the earbuds are now in pairing

mode. The LED indicator will alternately ﬂash blue and red.

2. Set your device to search for Bluetooth devices.

3. Open the Bluetooth feature on your device. Consult your device’s user guide for more information.

4. Select “Transformer” from the list of devices in the populated list.

5. If asked, enter the password “0000.”

6. after paired, blue LED will ﬂash every 10 sec

7. Hold the power button for 4 seconds to turn off the earbud.