Tout Terrain Weber - Close the Buckle and Tighten the Strap

7
9. Loop the long, middle strap of the support
through Singletrailer frame on the left and
right sides – do not put the belt under the
original Singletrailer seat. Close the buckle
and tighten the strap securely.
10. Loop the lower strap of the Weber suppor-
ter through the upper and lower sections of
thesingletrailerframe.
11. Open the Singletrailer‘s front Velcro panel
and thread the lower strap of the supporter
through the slot in the Singletrailer cover.
12. Close the buckle and tighten the strap.
The baby seat is completely assembled.