11
CAUTION: Be sure to unplug this appliance before cleaning and let it cool down
completely. To protect against electrical shock, do not immerse cord, plug or
unit in water or liquid.
1. Clean all detachable parts such as the inner cover, brewing basket, water tank
etc. with warm water. Clean the small brush at one end of spoon after each
use.
2. Push the anti-drip valve upwards 3-4 times to empty the residual water.
3. Wipe external surface of product with a soft, damp cloth to remove stains.
4. Water droplets may build up in the area above the brewing basket and drip
onto the product base during brewing. To control the dripping, wipe off the
area with a clean, dry cloth after each use of the product.
5. Replace all parts for your next use of the appliance.
Brew Coffee With Coffee Powder:
To keep your coffee maker operating eciently, you should periodically clean away
scale deposits left by the water according to the water quality in your area and the
use,
We recommend removing mineral deposits as follows:
1. Fill the tank with water and de-scaler to the max level as indicated on the
water tank (the scale of water to de-scaler is 4:1. Make sure you refer to the
instructions that come with your descaling product. Please use “household de-
scaler”), you may also use the citric acid instead of the de-scaler (one hundred
parts of water and three parts of citric acid).
2. Insert the glass carafe onto the warming plate.
3. Make sure the brewing basket is clear of coffee beans or powder and is in place
in the unit.
4. Switch on the appliance and allow it to “brew” the de-scaling solution.
5. After the “brew” one-cup solution has run, switch off the appliance.
6. Leave the solution for 15 minutes and repeat step 3-5.
7. Switch on the appliance and run off the solution until the water tank is
completely empty.
8. Rinse by operating the appliance with water only at least 3 times. This will
ensure that all de-scaler is flushed from the system.
8 - Cleaning & Care
To Next Page
Loading...