6
Before First Use:
Read all instructions and safety information carefully before first use. Please retain this
information for future reference.
1. Remove your appliance from the packaging.
2. Check that there is no damage to the cord or any visible damage to the body.
3. Dispose of the packaging in a responsible manner.
4. Remove any stickers or labels from the appliance
5. Thoroughly clean the basket and drawer with hot water, some washing-up liquid and
a non-abrasive sponge.
6. Wipe the inside and outside of the appliance with a moist cloth.
7. Do not fill the drawer with oil or frying fat. This is an oil-free fryer that works on hot
air.
Note: This appliance uses very little oil or no oil.
Using Your Appliance.
Preparing For Use:
1. Place the appliance on a stable, horizontal and even surface. Do not place the
appliance onto a non-heat-resistant surface.
2. Place the basket in the drawer.
3. Do not fill the drawer with oil or any other liquid.
4. Do not put anything on top of the appliance, as this will disrupt the airflow and the
hot air frying will be affected as a result.
Automatic Switch Off:
The Tower Air Fryer has a built-in timer, which will automatically shut down the Air
Fryer when timer reaches zero. You can manually switch off the Air Fryer by turning the
temperature and timer knob anti-clockwise to zero.
Air Fryer Drawer Safety Switch:
For your safety, this air fryer contains a safety switch in the drawer designed to keep if from
accidentally turning on when the frying basket and drawer are not properly situated inside
the appliance and the timer is not set. Before using the air fryer, please ensure that the
basket is inside of the drawer, the drawer is fully closed and the cooking timer has been
set.
Removing the Frying Basket:
The drawer and frying basket can both be removed fully from the Air Fryer. Pull on the
handle to slide the drawer and frying basket out of the Air fryer. Push the handle release
button cover forwards. There is a small button on the top of the handle. Push it down and
lift upwards to remove the frying basket from the drawer.
Air Frying:
1. Connect the mains plug into an earthed wall socket.
2. Carefully pull the drawer out of the Air Fryer.
3. Put the ingredients in the basket.
4. Slide the drawer back into the Air Fryer making sure to carefully align with the guides
in the body of the fryer.
5. Never use the drawer without the basket in it.
CAUTION: Do not touch the drawer immediately after use, as it gets very hot. Allow plenty
of time for it to cool. Only hold the drawer by the handle.
6. Determine the required preparation time for the ingredient. (Refer to the Settings
Table.)
7. To switch on the appliance, turn the timer dial to the required preparation time.
8. Turn the temperature control dial to the required temperature. (refer to the Settings
Table.) as a guide when determining the right temperature. Add 3 minutes to the
preparation time when the appliance is cold.
Note: If you wish, you can also preheat the appliance without any ingredients inside. In
this case, turn the timer dial to a time higher than 3 minutes and wait until the heating-
up light goes out. Then fill the basket and turn the timer dial to the required preparation
time.
a. The timer will begin counting down the set preparation time.
b. During the hot air frying process, the working light will come on and go out from
time to time. This indicates that the heating element is switching itself on and off to
maintain the set temperature.
c. Excess oil from the ingredients is collected on the bottom of the drawer.
To Next Page
Loading...
