EasyManua.ls Logo

Tower Hobbies Tower Kaos 40 ARF User Manual

Default Icon
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
WARRANTY
Tower Hobbies
®
guarantees this kit to be free from defects in both material and workmanship at the date of purchase. This
warranty does not cover any component parts damaged by use or modification. In no case shall Tower Hobbies’ liability
exceed the original cost of the purchased kit. Further, Tower Hobbies reserves the right to change or modify this warranty
without notice.
In that Tower Hobbies has no control over the final assembly or material used for final assembly, no liability shall be assumed
nor accepted for any damage resulting from the use by the user of the final user-assembled product. By the act of using the
user-assembled product, the user accepts all resulting liability.
If the buyer is not prepared to accept the liability associated with the use of this product, the buyer is advised to return this
kit immediately in new and unused condition to the place of purchase.
READ THROUGH THIS MANUAL COMPLETELY BEFORE STARTING CONSTRUCTION. IT CONTAINS IMPORTANT
INSTRUCTIONS AND WARNINGS CONCERNING THE ASSEMBLY AND USE OF THIS MODEL.
© Copyright 2003 V 1.0 TOWZ1150 for TOWA2052
Tower Hobbies
P.O. Box 9078
Champaign, IL 61826
(800) 637-6050
www.towerhobbies.com
ARF
Wingspan: 55.5 in [1,415mm]
Wing Area: 585 sq in [38dm
2
]
Weight: 5 - 6 lbs [2,270 - 2,720g]
Length: 48.5 in [1,232mm]
Wing Loading: 19.5 - 24 oz/sq ft [59 - 73g/dm
2
]
Engine: .40 - .46 cu in [6.5 - 7.5cc] two-stroke
.48 - .70 cu in [8.0 - 11.5cc] four-stroke
Radio: 4-channel, four servos
®
®
Question and Answer IconNeed help?

Do you have a question about the Tower Hobbies Tower Kaos 40 ARF and is the answer not in the manual?

Tower Hobbies Tower Kaos 40 ARF Specifications

General IconGeneral
Wingspan56 in (1422 mm)
Weight5.5-6 lb (2.5-2.7 kg)
Radio System4-channel minimum
ConstructionBalsa and plywood
Skill LevelIntermediate
Engine Size.40-.46 cu in (6.5-7.5 cc)
Servos4 standard servos

Summary

PROTECT YOUR MODEL, YOURSELF & OTHERS...FOLLOW THESE IMPORTANT SAFETY PRECAUTIONS

IMPORTANT BUILDING NOTES

KIT INSPECTION

BUILD THE WING

INSTALL THE AILERONS

Step-by-step guide for installing the ailerons onto the wing panels.

JOIN THE WINGS

INSTALL THE MAIN LANDING GEAR

INSTALL THE AILERON SERVO

ASSEMBLE THE FUSELAGE

INSTALL THE NOSE GEAR

INSTALL THE FUEL TANK & ENGINE

INSTALL THE RADIO & SERVOS

GET THE MODEL READY TO FLY

SET THE CONTROL THROWS

Adjust control surface movement to specified throws for optimal flight.

BALANCE THE MODEL (C.G.)

Critical procedure to set the center of gravity for stable flight.

BALANCE THE PROPELLERS

ENGINE SAFETY PRECAUTIONS

AMA SAFETY CODE (excerpt)

CHECK LIST

Related product manuals