Need help?Do you have a question about the Toyama marine TM2.6TS and is the answer not in the manual?
Emphasizes reading the manual and general safety advice.
Warning about electrical hazards and necessary protective measures.
Requirements for wearing gloves, footwear, eye, ear, and head protection.
Symbols indicating risks of injury, burns, high temperatures, and flammable materials.
Symbols for slipping risks, toxic air, kickback, and rotating parts.
Identification and labeling of the outboard engine's external parts.
Instructions for connecting and preparing an external fuel tank.
Specifies the correct ratios for mixing gasoline and engine oil.
Guidance on choosing the right propeller for optimal engine performance.
Step-by-step instructions for mounting the outboard engine on a boat.
How to set the engine's mounting height for best performance and efficiency.
Procedures for securely fixing the engine and its initial break-in period.
Checks for fuel leaks, hose condition, and secure connections.
Verifying smooth operation of throttle and steering controls.
Inspecting the engine and propeller for any damage or loose parts.
Safe steps for filling the fuel tank and closing the cap.
How to connect the fuel hose and open the fuel cock.
Priming the fuel system and setting the gear lever to neutral.
Proper attachment and use of the emergency stop switch lanyard.
Step-by-step instructions for starting the engine manually.
Warming up the engine and verifying water flow from the cooling hole.
How to steer the boat using the rudder and changing direction.
Adjusting engine speed using the throttle lever and indicator.
Customizing throttle resistance for user preference.
Allowing the engine to cool down at low speed before turning it off.
Procedures for safely stopping the outboard engine using the stop button or rope.
How to set the engine angle for balance, stability, and performance.
Positioning the engine upwards for stationary periods or shallow water.
Steps for lifting and securing the outboard in the upright position.
Steps for lowering the outboard and adjusting steering friction.
Guidelines for operating the outboard when sailing in shallow waters.
Procedures for flushing, cleaning, and lubricating engine parts.
Instructions for inspecting, cleaning, and adjusting ignition spark plugs.
Verifying fuel system integrity and electrical connections for proper function.
Inspecting the propeller and checking engine idle speed for optimal performance.
Procedures for transmission oil exchange and propeller removal/installation.
Checking anodes and cleaning the fuel tank to prevent corrosion.
Cleaning the outboard exterior and verifying the top cover fit.
Procedures and precautions for safely transporting the outboard engine.
Steps for properly storing the outboard for extended periods to prevent damage.
General| Engine Type | 2-stroke |
|---|---|
| Max Power | 2.6 HP |
| Fuel Mixture Ratio | 50:1 |
| Fuel Tank Capacity | 1.2 L |
| Shaft Length | Short |
| Gear Ratio | 2.08:1 |
To Next Page