A62198
3124
5
6
7
A62187
Fix
Tighten
A62185
Mark
Mark
Mark
Timing Chain
Cover Surface
Groove
A62177
Raise
Push
Hook
Pin
14–104
–ENGINE MECHANICAL CAMSHAFT
2004 COROLLA (RM1037U)
(e) Examine the front marks and numbers and tighten the
bolts in the order shown in the illustration.
Torque: 13 N⋅ m (133 kgf⋅cm, 10 ft⋅lbf)
(f) Install the bearing cap No. 1.
Torque: 23 N⋅ m (235 kgf⋅cm, 17 ft⋅lbf)
(g) Fix the camshaft with a wrench and so on, then tighten the
camshaft timing gear set bolt.
Torque: 54 N⋅ m (551 kgf⋅cm, 40 ft⋅lbf)
NOTICE:
Be careful not damage the valve lifter.
(h) Check the match marks on the timing chain and camshaft
timing sprockets, and then the alignment of the pulley
groove with timing mark of the chain cover as shown in the
illustration.
(i) Install chain tensioner.
(1) Check the O–ring is clean, and set the hook as
shown in the illustration.
To Next Page
Loading...
