Toyota 2001-2004 Corolla - Page 43

A62814
42 531
B06777
A64030
A62816
2
5
3
1
10 8 4
79
6
14–118
–ENGINE MECHANICAL CYLINDER HEAD GASKET
1128
2004 COROLLA (RM1037U)
42. REMOVE CAMSHAFT
(a) Uniformly loosen and remove the 19 bearing cap bolts, in
several passes, in the sequence shown, and remove the
9 bearing caps, intake and exhaust camshafts.
43. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE
ASSY
(a) Remove the bolt and camshaft timing oil control valve.
44. REMOVE MANIFOLD STAY
(a) Remove the 3 bolts and manifold stay.
45. REMOVE CYLINDER HEAD SUB–ASSY
(a) Using a 10 mm bi–hexagon wrench, uniformly loosen and
remove the 10 cylinder head bolts, in several passes, in
the sequence shown, and remove the 10 cylinder head
bolts and 10 plate washers.
(b) Remove the cylinder head.
46. REMOVE CYLINDER HEAD GASKET