02 MY MR2 SMT(U) L/O 0108
15
01 03 29
SB12037
2. In front of the vehicle, pull up the
auxiliary catch lever and lift the
trunk lid.
SB12068
Front box cover
3. Hold the trunk lid open by inserting
the support rod into the slot.
Before closing the trunk lid, return the
support rod to its clip—this prevents
rattles. Then lower the trunk lid and make
sure it locks into place. If necessary,
press down gently on the front edge to
lock it.
CAUTION
After inserting the support rod into
the slot, make sure the rod sup-
ports the trunk lid securely from
falling down on to your head or
body.
Before closing the trunk lid, lock
the front box cover securely.
This prevents the front box from
being damaged.
Keep the trunk lid closed while
driving. This keeps the luggage
from being thrown out.
NOTICE
Be sure to return the support rod to
its clip before closing the trunk lid.
Closing the trunk lid with the support
rod up could cause the trunk lid to
bend.
To Next Page
Loading...
