02 MY MR2 SMT(U) L/O 0108
196
01 06 11
CAUTION
Do not mix radial, bias belted, or
bias–ply tires on your vehicle. It
can cause dangerous handling char-
acteristics, resulting in loss of con-
trol.
Do not use tires or wheels other
than the manufacturer’s recom-
mended size.
Toyota recommends all four tires, or at
least both front or rear tires be re-
placed as a set.
See “If you have a flat tire—” on page
153 in Section 4 for tire change proce-
dure.
When a tire is replaced, the wheel
should always be balanced.
An unbalanced wheel may affect vehicle
handling and tire life. Wheels can get out
of balance with regular use and should
therefore be balanced occasionally.
When replacing a tubeless tire, the air
valve should also be replaced with a
new one.
Rotating tires
SB72017
Turning direction
Turning direction indicators (type A)
SB72018
Turning direction
Turning direction indicators (type B)
SB72019
To Next Page
Loading...
