EasyManua.ls Logo

Toyota 2002 Sequoia - Replacing Light Bulbs

Toyota 2002 Sequoia
329 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
02_SEQUOIA_U (L/O 0108)
300
2002 MY SEQUOIA_U (OM34418U)
The following illustrations show how to
gain access to the bulbs. When replacing
a bulb, make sure the ignition switch and
light switch are off. Use bulbs with the
wattage ratings given in the table.
CAUTION
! To prevent yourself from burning,
do not replace the light bulbs while
they are hot.
! Halogen bulbs have pressurized gas
inside and require special handling.
They can burst or shatter if
scratched or dropped. Hold a bulb
only by its plastic or metal case.
Do not touch the glass part of a
bulb with bare hands.
NOTICE
Only use a bulb of the listed type.
Light bulbs
Bulb
No.
W Typ e
Headlights 60/55 A
Front fog lights 9006 55 B
Parking/front side
marker and front
turn signal lights
3157
NA
27/8 C
Rear turn signal
lights
7440 21 D
Stop/tail and rear
side marker lights
7443 21/5 D
Backup lights 921 18 D
Tail lights 168 5 D
License plate lights 168 5 D
High mounted stop
light
168 5 D
Interior lights 8 E
Personal lights 3.8 D
Glove box light 1.2 D
Luggage
compartment light
8 E
Vani ty light s 3 D
Door courtesy
lights
194 3.4 D
A: HB2 halogen bulbs
B: HB4 halogen bulbs
C: Wedge base bulbs (amber)
D: Wedge base bulbs (clear)
E: Double end bulbs
Replacing light bulbs—

Table of Contents

Related product manuals