EasyManua.ls Logo

Toyota 2002 Sequoia - INSTALLING THE COMFORT GUIDE

Toyota 2002 Sequoia
329 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
02_SEQUOIA_U (L/O 0108)
64
2002 MY SEQUOIA_U (OM34418U)
INSTALLING THE COMFORT GUIDE
1. Pull the comfort guide out of the
pocket on the rear of the seatback
of the third left seat.
2. Pinch the two edges of the shoulder
seat belt for the third seat center
position with your fingers and slide
the belt past the slot of the guide as
shown above. At this time, the elas-
tic cord must be behind the seat
belt.
CAUTION
Make sure the belt is not twisted and
that it lies flat. The elastic cord must
be behind the belt and the guide
must be on the front.
3. Buckle, position and release the seat
belt. (For wearing the seat belt, see
“—Front and rear seat belts” on
page 56 in this section.) Make sure
the shoulder belt crosses the shoul-
der.

Table of Contents

Related product manuals