Toyota 2003 MATRIX - Page 118

’03 MATRIX_U (L/O 0201)
114
2003 MY COROLLA MATRIX_U (OM12767U)
To scan all the frequencies:
Push and hold either side of the “SEEK/
SCAN” button for two seconds. “SCAN”
appears on the display and you hear a
beep. The radio will find the next station
up the station band, stay there for 5 sec-
onds, and then scan again. To cancel
scan and remain on the current station,
push this button again.
The radio will scan in forward only.
You can also scan only to stations with
the types of programs you want to listen
to or traffic announcements. (See “PROG
TYPE”.)
Compact disc player
Push and hold either side of the “SEEK/
SCAN” button for more than two seconds.
“SCAN” will appear on the display and
you hear a beep. The disc will go to the
the next track and play for 10 seconds,
then go on the next track. To select a
track, push this button again.
The compact disc will scan in forward
only.
SEEK (Seeking)
Radio
In the seek mode, the radio finds and
plays the next station up or down the
station band.
To seek a station, quickly push and re-
lease either side of the “SEEK/SCAN” but-
ton. If you hear a beep, the radio will
scan the stations. (See “SCAN”.) Do this
again to find another station.
You can also seek only to stations with
the types of programs you want to listen
to or traffic announcements. (See “PROG
TYPE”.)
Compact disc player
By using this button, you can skip up or
down to a different track.
Push either side of the “SEEK/SCAN” but-
ton repeatedly until the number of the
track you want to listen to appears on the
display. If you want to return to the begin-
ning of the current track, push the down
side of the button one time, quickly.
TONE (Manual tone adjustment function)
Push the “TONE” button to select the
bass, midrange or treble tone control posi-
tion. (“BASS”, “MID”, “TREB” will appear
on the display.) To adjust the tone, turn
the “TUNE/SELECT” knob.
“BASS”: Adjusts low−pitched tones. The
display ranges from −6 to +6.
“MID”: Adjusts mid−pitched tones. The dis-
play ranges from −6 to +6.
“TREB”: Adjusts high−pitched tones. The
display ranges from −6 to +6.
To adjust all of the tone controls to the
middle position, push and hold the “TONE”
button for more than two seconds. “FLAT”
will appear on the display.
TRAF (Traffic)
This button turns the traffic announcement
(TA) feature on and off.
By pushing the “< >” button, “TRAF” ap-
pears on the display and the radio will
start seeking any traffic program station.
When a traffic program station is found,
“TRAF” will be displayed (<TRAF>). If no
traffic program stations are found, “No
Traffic” will appear on the display.
carownersmanual.net
carownersmanual.net