’03 MATRIX_U (L/O 0201)
86
2003 MY COROLLA MATRIX_U (OM12767U)
3. Trip meter reset knob—Resets the two
trip meters to zero, and also change
the meter display.
To change the meter display, quickly
push and release the knob. The meter
display changes in the order from the
odometer to trip meter A to trip meter
B, then back to the odometer each
time you push.
To reset the trip meter A to zero, dis-
play the meter A reading, then push
and hold the knob until the meter is
set to zero. The same process can be
applied for resetting the trip meter B.
The outside temperature is indicated on
the display when the ignition switch is
on.
The displayed temperature ranges from
−30_C (−22_F) up to 50_C (122_F).
If there is any abnormality in the connec-
tion of the outside air temperature sensor,
“−−” will appear on the display. If “−−”
appears on the display, contact your Toyo-
ta dealer.
There may be a case that “−−” appears
momentarily when the ignition is quickly
turned to “ON”. It is normal if it goes out
soon.
(a) If parking brake
is off, stop
immediately and
contact Toyota
dealer.
(b) Fasten driver’s
seat belt.
If the indicator or
buzzer comes on...
(d) Stop and check.
(indicator and buzzer)
(e) Stop and check.
or
Do this.
(c) Fasten front
passenger’s seat
belt.
Outside temperature gauge
Service reminder indicators
and warning buzzers
carownersmanual.net
carownersmanual.net
To Next Page
Loading...
Need help?
General
