04 SIENNA_U (L/O 0408)
311
2004 SIENNA from Aug. ’04 Prod. (OM45422U)
Fan speed selector (front)
This selector knob is used to turn the rear
air conditioning system on/off and adjust
the fan speed.
In the “REAR” position, you can operate
the system by the rear controllers.
Turn the knob to adjust the fan speed—to
the right to increase, to the left to de-
crease.
Turning the knob to the “OFF” position
turns the system off and it cannot be
operated by the rear controllers.
Fan speed selector (rear)
When the front fan speed selector is in
the “REAR” position, you can operate the
rear fan speed selector.
Turn the knob to adjust the fan speed—to
the right to increase, to the left to de-
crease.
Temperat ure selector
Turn the knob to adjust the tempera-
ture—to the right to warm, to the left to
cool.
Air flow selectors
Push the button to select the vents used
for air flow.
1. Panel—Air flows from the roof panel
vents.
2. Bi−level—Air flows from both the roof
panel vents and floor vent.
3. Floor—Air flows from the floor vent.
—Air flow selector settings
To Next Page
Loading...
Need help?
General
