Fig. 96: Measuring No. 1 Shift Fork And Hub Sleeve Clearance
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
3. INSPECT OUTPUT SHAFT
a. Check the output shaft for wear or damage.
b. Using a micrometer, measure the outer diameter of the output shaft journal surface.
Minimum outer diameter:
Part A: 37.610 mm (1.4807 in.)
Part B: 34.502 mm (1.3583 in.)
2005 Toyota RAV4
2005 TRANSMISSION Manual Transaxle - RAV4
Microsoft
Tuesday, July 21, 2009 9:47:23 AM Page 104 © 2005 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
