Fig. 95: Measuring Clearance Between Synchronizer Ring Back & Gear Spline End
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2. MEASURE NO. 1 SHIFT FORK AND HUB SLEEVE CLEARANCE
Using a feeler gauge, measure the clearance between the hub sleeve and shift fork.
Maximum clearance: 0.35 mm (0.0138 in.)
If the clearance exceeds the maximum, replace the shift fork or hub sleeve.
2005 Toyota RAV4
2005 TRANSMISSION Manual Transaxle - RAV4
Microsoft
Tuesday, July 21, 2009 9:47:23 AM Page 103 © 2005 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
