Toyota 2005 RAV4 - Page 102

Fig. 94: Inspecting Gear Synchronizer Rings
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Using a feeler gauge, measure the clearance between the synchronizer ring back and gear spline
end.
Minimum clearance: 0.7 mm (0.028 in.)
If the clearance is less than the minimum, replace the s
y
nchronizer rin
g
.
2005 Toyota RAV4
2005 TRANSMISSION Manual Transaxle - RAV4
Microsoft
Tuesday, July 21, 2009 9:47:23 AM Page 102 © 2005 Mitchell Repair Information Company, LLC.