Toyota 2005 RAV4 - Page 72

Fig. 66: Installing Transmission Case To Transaxle Case Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
d. Install the output shaft rear taper roller bearing outer race.
e. Install the adjusting shim.
HINT:
When reusing the output shaft bearing, first install a shim of the same thickness as before. If installing a
new taper roller bearing, first select and install a shim of lesser thickness than before.
f. Install the rear bearing retainer.
g. Using a Torx(R) wrench (T45), install and torque the 7 Torx(R) screws.
Torque: 42 N.m (430 kgf.cm, 31 ft.lbf)
h. Install a new lock nut to the output shaft.
i. Turn the output shaft ri
g
ht and left 2 or 3 times to allow the bearin
g
to settle.
2005 Toyota RAV4
2005 TRANSMISSION Manual Transaxle - RAV4
Microsoft
Tuesday, July 21, 2009 9:47:23 AM Page 72 © 2005 Mitchell Repair Information Company, LLC.