j. Using a torque wrench, measure the preload.
Preload (at starting):
New bearing:
0.8 to 1.6 N.m (8 to 16 kgf.cm, 6.9 to 13.9 in.lbf)
Reused bearing:
0.5 to 1.0 N.m (5 to 10 kgf.cm, 4.3 to 8.7 in.lbf)
If the preload is not within the specification, select an appropriate adjusting shim.
Fig. 67: Measuring Preload
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
THICKNESS SPECIFICATION CHART
2005 Toyota RAV4
2005 TRANSMISSION Manual Transaxle - RAV4
Microsoft
Tuesday, July 21, 2009 9:47:23 AM Page 73 © 2005 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
