Toyota 2005 RAV4 - Page 74

k. Remove the lock nut.
l. Remove the 5 parts. Removal is in the reverse order of installation.
1. Remove the rear bearing retainer.
2. Remove the shim.
3. Remove the transmission case.
4. Remove the output shaft assembly.
5. Remove the output shaft rear bearing outer race.
INPUT SHAFT
COMPONENTS
Mark Thickness mm (in.) Mark Thickness mm (in.)
0 1.30 (0.0512) D 1.95 (0.0768)
1 1.35 (0.0531) E 2.00 (0.0787)
2 1.40 (0.0551) F 2.05 (0.0807)
3 1.45 (0.0571) G 2.10 (0.0827)
4 1.50 (0.0591) H 2.15 (0.0846)
5 1.55 (0.0610) J 2.20 (0.0866)
6 1.60 (0.0630) K 2.25 (0.0886)
7 1.65 (0.0650) L 2.30 (0.0906)
8 1.70 (0.0669) M 2.35 (0.0925)
9 1.75 (0.0689) N 2.40 (0.0945)
A 1.80 (0.0709) P 2.45 (0.0965)
B 1.85 (0.0728) Q 2.50 (0.0984)
C 1.90 (0.0748) - -
2005 Toyota RAV4
2005 TRANSMISSION Manual Transaxle - RAV4
Microsoft
Tuesday, July 21, 2009 9:47:23 AM Page 74 © 2005 Mitchell Repair Information Company, LLC.