Fig. 76: Measuring Clearance Between Hub Sleeve & Shift Fork
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
3. INSPECT INPUT SHAFT
a. Check the input shaft for wear or damage.
b. Using a micrometer, measure the outer diameter of the input shaft journal surface.
Minimum outer diameter:
Part A: 27.957 mm (1.1007 in.)
Part B: 35.984 mm (1.4167 in.)
2005 Toyota RAV4
2005 TRANSMISSION Manual Transaxle - RAV4
Microsoft
Tuesday, July 21, 2009 9:47:23 AM Page 83 © 2005 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
