Fig. 80: Installing Springs & Shifting Keys To Clutch Hub
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
3. INSTALL NEEDLE ROLLER BEARING, 3RD GEAR, SYNCHRONIZER RING AND NO. 2
HUB SLEEVE ASSEMBLY TO INPUT SHAFT
a. Apply MP grease to the needle roller bearing and install it.
b. Install the 3rd gear.
c. Place the synchronizer ring on the gear and align the ring slots with the shifting keys.
d. Using SST and a press, install the No. 2 hub sleeve assembly.
SST 09506-35010
2005 Toyota RAV4
2005 TRANSMISSION Manual Transaxle - RAV4
Microsoft
Tuesday, July 21, 2009 9:47:23 AM Page 87 © 2005 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
