Toyota 2005 RAV4 - Page 88

Fig. 81: Installing 3rd Gear, Synchronizer Ring & No. 2 Hub Sleeve Assembly
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
4. INSTALL SNAP RING
a. Select a snap ring that allows the minimum axial play.
THICKNESS SPECIFICATION CHART
b
. Using a screwdriver and hammer, tap in the snap ring.
Mark Thickness mm (in.) Mark Thickness mm (in.)
H 2.30 (0.0906) M 2.50 (0.0984)
J 2.35 (0.0925) N 2.55 (0.1004)
K 2.40 (0.0945) P 2.60 (0.1024)
L 2.45 (0.0965) - -
2005 Toyota RAV4
2005 TRANSMISSION Manual Transaxle - RAV4
Microsoft
Tuesday, July 21, 2009 9:47:23 AM Page 88 © 2005 Mitchell Repair Information Company, LLC.