Fig. 82: Using A Screwdriver & Hammer To Tap In Snap Ring
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
5. MEASURE 3RD GEAR THRUST CLEARANCE (See DISASSEMBLY)
6. INSTALL SPACER, SYNCHRONIZER RING, NEEDLE ROLLER BEARING, 4TH GEAR AND
REAR BEARING
a. Install the spacer.
b. Apply MP grease to the 2 needle roller bearings and install it.
c. Place the synchronizer ring on the gear and align the ring slots with the shifting keys.
d. Install the 4th gear.
e. Using SST and a press, install the rear bearing.
SST 09309-36010
2005 Toyota RAV4
2005 TRANSMISSION Manual Transaxle - RAV4
Microsoft
Tuesday, July 21, 2009 9:47:23 AM Page 89 © 2005 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
