Toyota 2005 RAV4 - Page 90

Fig. 83: Installing Spacer, Synchronizer Ring, Needle Roller Bearing, 4th Gear & Rear
Bearing
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
7. INSTALL SNAP RING
a. Select a snap ring that allows the minimum axial play.
THICKNESS SPECIFICATION CHART
b
. Using a screwdriver and hammer, tap in the snap ring.
Mark Thickness mm (in.) Mark Thickness mm (in.)
1 2.35 (0.0925) 5 2.55 (0.1004)
2 2.40 (0.0945) 6 2.60 (0.1024)
3 2.45 (0.0965) 7 2.65 (0.1043)
4 2.50 (0.0984) 8 2.70 (0.1063)
2005 Toyota RAV4
2005 TRANSMISSION Manual Transaxle - RAV4
Microsoft
Tuesday, July 21, 2009 9:47:23 AM Page 90 © 2005 Mitchell Repair Information Company, LLC.