’06 HIGHLANDER HB_U (L/O 0503)
63
2006 HIGHLANDER (Hybrid) from Mar. ’05 Prod. (OM48530U)
CAUTION
When returning the seatback to the
upright position, observe the follow-
ing precautions in order to prevent
personal injury in a collision or sud-
den stop:
! Make sure the seatback is securely
locked by pushing forward and rear-
ward on the top of the seatback.
Failure to do so will prevent the
seat belt from operating properly.
! Make sure the seat belts are not
twisted or caught under the seat
and are arranged in their proper
position and are ready to use.
To flatten the seatbacks, do the follow-
ing:
1. Hold the center of the lever and pull
it up, sliding the second seat to the
rear−most position. Then pull the
seat forward slightly until it locks.
2. Remove the head restraint. Hold the
center of the lever and pull it up.
Then slide the front seat further for-
ward than the front−most lock posi-
tion.
Flattening seatbacks
(manual seat)
To Next Page
Loading...
