Toyota 2006 Sequoia - Page 242

’06_SEQUOIA_U (L/O 0508)
232
CONTROLLER FEATURES
1. “
” and “ ” (DISC/CH/PROG) buttons
2. “
” and “ ” (TUNE/TRACK) buttons
3. “ON/SOURCE” button
4. “OFF” button
1. “
” and “ ” (DISC/CH/PROG) but-
tons
Radio
You can scan only the preset stations for
the band of the front audio system. (For
instructions, see “—Controls and features”
on page 213 in this Section.)
To scan the preset stations:
Push the “
” or “ ” (DISC/CH/PROG)
button. The radio will tune in the next
preset station up or down the band. The
station frequency will appear on the dis-
play.
Cassette tape player
Push the “
” or “ ” (DISC/CH/PROG)
button to select the other side of a cas-
sette tape. The display indicates which
side is currently selected. (“
” indicates
the top side, “
” indicates the bottom
side.)
Auto−reverse feature: After the cassette
player reaches the end of a tape side, it
automatically reverses and begins to play
the other side. This is true whether the
cassette was playing or fast forwarding.
Compact disc player with changer
Use these buttons to select a disc you
want to listen to.
Push the “
” or “ ” (DISC/CH/PROG)
button until the number of the disc you
want to listen appears on the display.
2. “
” and “ ” (TUNE/TRACK) buttons
Radio
Push the “
” or “ ” (TUNE/TRACK) but-
ton to tune or seek.
Tuning:
Quickly push and release the “
” or “ ”
(TUNE/TRACK) button. Each time you
push the button, the radio will step up or
down to another frequency. If you push
and hold the button, and the radio will go
into the seek mode.
Seeking:
Push and hold the “
” or “ ” (TUNE/
TRACK) button. The radio will seek up or
down for a station of the nearest frequen-
cy and will stop on reception. Each time
you push the button, the stations will be
searched one after another.