’07 HIGHLANDER HV_U (L/O 0608)
255
2007 HIGHLANDER HV from July ’06 Prod. (OM48685U)
Defogging
The inside of the windshield
For best results, set controls to:
Fan speed—Any setting except “OFF”
Temper a tur e—To wa r ds WARM
(red zone) to heat;
COLD (blue zone) to
cool
Air intake—FRESH (outside air)
Air flow—WINDSHIELD
Turning the air flow selector to the wind-
shield or floor/windshield position turns on
the defogging function with the purpose of
clearing the front view.
When turning the air flow selector to wind-
shield or floor/windshield position, the air
intake selects FRESH automatically. This
is to clean up the front view more quickly.
When the windshield position is selected,
it is not possible to select the
RECIRCULATE mode if you press the air
intake control button.
! On humid days, do not blow cold air
on the windshield—the difference be-
tween the outside and inside tempera-
tures could make the fogging worse.
Defrosting
The outside of the windshield
For best results, set controls to:
Fan speed—Any setting except “OFF”
Temper a t ur e—To wa r ds WARM
(red zone)
Air intake—FRESH (outside air)
Air flow—WINDSHIELD
Turning the air flow selector to the wind-
shield or floor/windshield position turns on
the defrosting function with the purpose of
clearing the front view.
When turning the air flow selector to wind-
shield or floor/windshield position, the air
intake selects FRESH automatically. This
is to clean up the front view more quickly.
When the windshield position is selected,
it is not possible to select the
RECIRCULATE mode if you press the air
intake control button.
! To heat the vehicle interior while de-
frosting the windshield, choose
floor/windshield air flow.