Toyota 2007 Highlander - Garage Door Opener

’07 HIGHLANDER HV_U (L/O 0608)
283
2007 HIGHLANDER HV from July ’06 Prod. (OM48685U)
Indicator light
Buttons
The garage door opener (
#
Universal Transceiver) is manufactured
under license from HomeLink
#
and can
be programmed to operate garage
doors, gates, entry doors, door locks,
home lighting systems, and security
systems, etc.
(a) Programming the HomeLink
#
The HomeLink
#
in your vehicle has 3
buttons and you can store one program
for each button.
To ensure correct programming into the
HomeLink
#
, install a new battery in the
hand−held transmitter prior to program-
ming.
The battery side of the hand−held trans-
mitter must be pointed away from the
HomeLink
#
during the programming pro-
cess.
For Canadian users, follow the procedure
in “Programming an entrance gate/pro-
gramming all devices in the Canadian
market”.
1. Decide which of 3 HomeLink
#
buttons
you want to program.
HomeLink$
Hand−held
garage
transmitter
25 to
75 mm
(1 to 3 in.)
2. Place your hand−held garage transmit-
ter 25 to 75 mm (1 to 3 in.) away from
the surface of the HomeLink
#
.
Keep the indicator light on the HomeLink
#
in view while programming.
Garage door opener