Toyota 2008 Rav4 - Page 266

’08 Rav4_U (L/O 0802)
256
2008 RAV4 from Feb. ’08 Prod. (OM42726U)
If [Confirm] is said, then input a voice
tag.
[Push the talk switch and say a name.] is
heard.
1. Push the talk switch and say the name
of the dial number that you want to
register.
[XXXX (phone number) Push the talk
switch and say confirm. Otherwise, say go
back.] is heard.
2. Follow voice guidance instructions, or
turn the “AUDIO CONTROL” knob until
[Confirm] is displayed and push the
knob.
[Stored. To register this as a speed dial
entry, push the talk switch and say set
speed dial. Otherwise, say confirm.] is
heard and [Stored] is displayed.
3. Select one of the following:
# Confirm
# Speed Dial
Confirm
Push the talk switch and say [Confirm], or
turn the “AUDIO CONTROL” knob until
[Confirm] is displayed and push the knob.
[Returning to the phone book.] is heard.
Speed Dial
1. Push the talk switch and say [Set
speed dial], or turn the “AUDIO CON-
TROL” knob until [Speed Dial] is dis-
played and push the knob.
[Set speed dial. Push the preset button to
assign to XXXX] is heard.
2. Push and hold the desired preset but-
ton.
[preset... is now assigned. Returning to
the phone book.] is heard.
The system may not function in the follow-
ing cases:
# If the phone book is full.
# If the dial number has more than 24
digits.
(b) By Phone
1. Push the talk switch and say [By
phone], or turn the “AUDIO CONTROL”
knob until [By Phone] is displayed and
push the knob.
[Phone entry. Prepare to send the informa-
tion from the phone. When ready, push
the talk switch and say confirm.] is heard.
2. Follow voice guidance instructions, or
turn the “AUDIO CONTROL” knob until
[Confirm] is displayed and push the
knob.
[Send the information at this time.] is
heard.
After the system has received the name
and phone number, [Push the talk switch
and say confirm. To select an alternate
number, say next or previous. Otherwise,
say go back.] is heard and the name and
phone number are displayed.
3. Follow voice guidance instructions,
push the talk switch and say [Confirm],
or turn the “AUDIO CONTROL” knob
until the dial number that you want to
register is displayed and push the
knob.
Next, input a voice tag.
For further details, see page 255.