’08 Rav4_U (L/O 0802)
265
2008 RAV4 from Feb. ’08 Prod. (OM42726U)
If the cellular phone is not registered, this
system cannot be used. See page 245 for
registering a cellular phone. Make sure
that [BT] is displayed and get the cellular
phone ready to use.
There are 3 ways to make a phone call
with this system.
# Speed dial
A phone call can be made with a preset
button in which a phone number is regis-
tered. See page 261 for setting the preset
buttons.
# Dial by Name
The system dials the numbers correspond-
ing to the spoken names registered in the
system.
# Dial by Number
The system dials to the spoken numbers.
To make a phone call
Push the off−hook switch to turn the
hands−free system on.
To speed dial
1. Push the preset button where the de-
sired number is set. The name or tele-
phone number is displayed.
2. Push the off−hook switch to dial.
To dial by Name
1. Push the talk switch and say [Dial by
name].
[Dial by name. Please push the talk
switch and say the stored name, or say
list names.] is heard and [Dial by Name]
is displayed.
2. Push the talk switch and say the
phone name, or turn the “AUDIO CON-
TROL” knob until the name that you
want to dial is displayed and push the
knob.
When using a voice command:
[XXXX (phone number) Push the off−hook
switch to dial. Otherwise, push the talk
switch and say dial, or go back.] is heard.
After that, do the one of the following:
# Push the off−hook switch.
# Push the talk switch and say [Dial].
# Turn the “AUDIO CONTROL” knob until
[Dial] is displayed and push the knob.
When using the knob:
It calls the number.
The system may not function in the follow-
ing cases:
# If there is no number registered in the
preset button.
# If the system does not recognize the
voice command.
—Making a phone call
To Next Page
Loading...
