Toyota 2008 Rav4 - Page 270

’08 Rav4_U (L/O 0802)
260
2008 RAV4 from Feb. ’08 Prod. (OM42726U)
To delete speed dial
1. Push the talk switch and say [Delete
speed dial], or turn the “AUDIO CON-
TROL” knob until [Del Spd Dial] is dis-
played and push the knob.
[Delete speed dial. Push the preset button
to delete from speed dial.] is heard.
2. Select the preset button that you want
to delete.
[To delete preset... push the talk switch
and say confirm. Otherwise, say go back.]
is heard.
3. Follow voice guidance instructions, or
turn the “AUDIO CONTROL” knob until
[Confirm] is displayed and push the
knob.
[Deleted.] is heard and [Deleted] is dis-
played.
[Returning to the phone book.] is heard.
The system may not function in the follow-
ing cases:
# If no speed dial has been registered.
# If the preset button has not been as-
signed.
To change name
1. Push the talk switch and say [Change
name], or turn the “AUDIO CONTROL”
knob until [Change Name] is displayed
and push the knob.
[Change name. Push the talk switch and
say the name to change.] is heard.
2. Follow voice guidance instructions, or
turn the “AUDIO CONTROL” knob until
the dial number that you want to
change is displayed and push the
knob.
When using a voice command:
[XXXX (phone number) Push the talk
switch and say confirm. Otherwise, say go
back.] is heard and the phone number is
displayed.
1. Follow voice guidance instructions, or
turn the “AUDIO CONTROL” knob until
[Confirm] is displayed and push the
knob.
[Push the talk switch and say a new
name.] is heard.
2. Follow voice guidance instructions, or
turn the “AUDIO CONTROL” knob until
[Record Name] is displayed, push the
knob and say new name.
[XXXX Push the talk switch and say con-
firm. Otherwise, say go back.] is heard.
3. Follow voice guidance instructions, or
turn the “AUDIO CONTROL” knob until
[Confirm] is displayed and push the
knob.
[Name changed. Returning to the phone
book.] is heard and [Changed] is dis-
played.