58
1-3. Adjustable components (seats, mirrors, steering wheel)
4RUNNER_U_(L/O_0808)
Driving position memory system (if equipped)
Your preferred driving position (the position of the driver’s seat) can
be entered into the computer’s memory and recalled with the touch
of a button.
Two different driving positions can be entered into memory.
n Entering a position into memory
Check that the shift lever is set in P.
Turn the engine switch to the ON position.
Adjust the driver’s seat to the desired positions.
While pushing the SET button,
push button “1” or “2” until the
signal beeps.
If the selected button has
already been preset, the previ-
ously recorded position will be
overwritten.
n Recalling the memorized position
Check that the shift lever is set in P.
Turn the engine switch to the ON position.
Push button “1” or “2” to recall
the desired position.
4RUNNER_U.book Page 58 Wednesday, July 30, 2008 3:00 PM
To Next Page
Loading...
