187
3-2. Using the audio system
3
Interior features
n Scanning all radio stations within range
Press the “SCAN” button.
All stations with reception will be played for 5 seconds each.
When the desired station is reached, press the “SCAN” button
once again.
XM
®
Satellite Radio (if equipped)
n Receiving XM
®
Satellite Radio
Press and hold until SAT shows in the display.
The display changes as follows each time is pressed.
AM → SAT1 → SAT2 → SAT3
Turn to select the desired channel from all categories
or press ∧ or ∨ on to select the desired channel in the
current category.
n Setting XM
®
Satellite Radio channel presets
Select the desired channel. Press the button (from to )
the channel is to be set to until you hear a beep.
n Changing the channel category
Press ∧ or ∨ on .
To Next Page
Loading...
