188
3-2. Using the audio system
n Scanning XM
®
Satellite Radio channels
l Scanning channels in the current category
Press the “SCAN” button.
When the desired channel is reached, press the “SCAN”
button again.
l Scanning preset channels
Press and hold the “SCAN” button until you hear a beep.
When the desired channel is reached, press the “SCAN”
button again.
n Displaying text information
Press the “TEXT” button.
The display will show up to 10 characters.
The display changes as follows each time the button is pressed.
l CH NAME
l TITLE (SONG/PROGRAM TITLE)
l NAME (ARTIST NAME/FEATURE)
l CH NUMBER
To Next Page
Loading...
